Adams Mechanical LLC Heating & Cooling
Family-owned, the Fenton firm installs and repairs furnaces, boilers, heat pumps, ductless mini-splits and air conditioning. Its site names Grand Blanc, Linden and Holly among its towns.
- Website checked
Heating contractors and plumbers for breakdowns.
Heating and cooling emergencies in Flint tend to be heating emergencies first. The National Weather Service Detroit/Pontiac office's Flint climate report, which uses the 1991–2020 normals, gives a normal December 17 of a 34°F high and a 22°F low, with 5.7 inches of snowfall for December 1–17. A furnace that fails in that stretch leaves a house cold quickly, and pipes can be at risk. When you hire, remember that Michigan requires a mechanical contractor's licence with the right classification to install, alter or service HVAC equipment, hydronic heating and cooling piping, and refrigeration. Ask to see the licence and its classification before work starts. Some small jobs, such as portable equipment, do not need a permit, but a furnace or boiler replacement is a different matter, so ask who pulls any permit. Flint's Building and Safety Division inspects mechanical work, and the city says its inspectors are licensed by the State of Michigan. Ask for a written quote that names the equipment and the work.
Source: National Weather Service Detroit/Pontiac (source, opens in a new tab)
Family-owned, the Fenton firm installs and repairs furnaces, boilers, heat pumps, ductless mini-splits and air conditioning. Its site names Grand Blanc, Linden and Holly among its towns.
Based in Holly, the business handles ductless mini-splits, furnaces and water heaters, and it works with Rheem equipment.
Open around the clock every day, this Clio contractor works on furnaces, heat pumps, ductless mini-splits and air conditioning. It works with Lennox, Carrier, Trane, Rheem and Amana equipment.
Founded in 1993, the Goodrich company handles heating repair and offers emergency support. Its site also covers electrical services, and it carries the Generac brand.
Seven days a week into the evening, the Davison company covers furnaces, boilers, heat pumps and water heaters. Its site mentions power outages, no heat and mould, and it uses Generac units.
Flushing-based and family-owned, the firm handles furnace repair, air conditioning and heating repair. Its site addresses homes left with no heat, and it gives free estimates.
Same-day service is offered by this Flint firm, which installs and repairs furnaces, boilers and water heaters and works on air conditioning. Financing is available.
Emergency service is offered by this family-owned Fenton company, which repairs furnaces and air conditioning and works with Rheem equipment. It services all makes and models.
Ductless systems are a focus for this Swartz Creek contractor, which also works on boilers, furnaces, heat pumps and air conditioning. Financing is available, and it works on indoor air quality.
Based in Swartz Creek, the family-owned firm has operated since 2010 and covers furnace repair, heat pumps and air conditioning. Its warranty runs two years.
Open weekdays, this air conditioning contractor offers emergency service and works on furnaces, boilers and heat pumps. Lennox, Carrier, Trane and Rheem equipment is among its brands.
Founded in 2017, the company takes emergency calls and works on furnaces, boilers and air conditioning. It also does backup power work and gives free estimates.
With 25 years of experience, this family-owned Clio company handles boilers, water heaters, air conditioning and heating repair. It offers emergency service and financing.
Family-owned since 2001, the firm works on furnaces, boilers, heat pumps and ductless mini-splits, and it works with Daikin equipment. Its work carries a one-year warranty.
Flint-based and open 24 hours every day, the business covers furnace repair, heat pumps, ductless mini-splits and zoning systems.
Since 1941, the company has worked on furnaces, boilers, heat pumps and air conditioning, and it works with Lennox equipment.
Tankless water heaters and tankless boilers are the focus of this plumbing firm, which also works on furnaces. It serves all of Lower Michigan, and financing is available.
This Flint plumber, open around the clock every day, handles heating repair and water heaters, and it uses Generac equipment. Its site names Burton, Linden and Flushing among its towns.
Operating 24 hours a day, it also handles frozen pipes and basement flooding alongside furnaces, boilers and heat pumps. Lennox, Carrier and Amana are brands it works with, and its warranty covers one year.
This family-owned firm, operating since 1998, covers furnaces, boilers and heat pumps, and it is open around the clock. It also handles backup power and basement flooding.
Also serves Detroit
Founded in 2014, the firm covers furnaces, heat pumps and ductless mini-splits, and it does backup power work with Generac equipment.
Family-owned plumbing and heating company in Goodrich, Michigan, working on sump pumps for flooded basements, plus heating repair, boilers, water heaters and HVAC.
Not yet verified. We checked that each one’s own website offers this work, but we haven’t contacted them yet. How a business gets listed
Know a good one we’re missing? Suggest one
Have fuel-burning appliances such as a furnace or boiler inspected by a professional at least once a year.
Get written quotes from at least three contractors for the same work, and check references from recent clients.
Put it in a written contract: the work, price, deposit, start and finish dates, warranty, permits and clean-up. Paying cash to skip it leaves you no recourse.
Michigan requires a mechanical contractor's licence with the right classification to install, alter or service HVAC equipment, hydronic heating and cooling piping, and refrigeration. Before anyone opens your furnace or boiler, ask for the licence and check that its classification covers the work you need done. michigan.gov (source, opens in a new tab)
Not always. Michigan does not require permits for portable equipment, window air conditioners of not more than 1.5 hp, or gas burners under 30,000 Btu/hr. Larger or fixed work may need one, so ask the contractor whether a permit applies and who will obtain it. michigan.gov (source, opens in a new tab)
Flint's Building and Safety Division provides inspection services for all trades, including mechanical, plumbing, electrical and building work. The city says all its inspectors are licensed by the State of Michigan. If your job needs a permit, ask the contractor how the inspection will be scheduled. City of Flint (source, opens in a new tab)
Ask for a written quote that names the equipment, describes the work and parts, and says whether a permit is needed. Get the contractor's licence details in writing too. When you compare quotes, check that each one covers the same work, and ask about any extra charges before you agree.