Desert Air Technologies LLC
Air conditioning and HVAC work for homes and businesses in Kennewick, Richland, Pasco and West Richland. Service runs around the clock, and a 10-year warranty applies.
- Website checked
Heating contractors and plumbers for breakdowns.
Heating and cooling emergencies in the Tri-Cities come with two local reference points. Kennewick's permitting guide describes a Mechanical Permit as covering the installation, maintenance, alteration and inspection of mechanical systems used for heating, air and fuel gas-fired appliances. And eastern Washington felt the cold of December 2022, when the state climatologist reported mean temperatures well below normal, among the top ten coldest Decembers on record. For you, that means a failed furnace or frozen pipe is not only a repair call but may also involve a permit. Before you hire, ask whether the work needs a Mechanical Permit from the city and who will pull it. If the repair touches wiring, ask about the electrical permit as well. Ask for a written quote that names the equipment, the work and any permit, and keep the paperwork once the job is done.
Air conditioning and HVAC work for homes and businesses in Kennewick, Richland, Pasco and West Richland. Service runs around the clock, and a 10-year warranty applies.
Ruud is one of the brands the Pasco business lists, and its work covers furnaces, boilers, heat pumps and air conditioning. Its hours run weekdays only.
Founded in 1961, the Kennewick company repairs and replaces air conditioning systems, with Lennox and Daikin among its brands. Flexible financing options are offered.
Emergency service is offered by this HVAC contractor, founded in 2018 and serving Kennewick, Richland and Pasco. Its office hours run weekdays.
Round-the-clock service is offered by this Tri-Cities contractor, which has served the area since 1997 and handles furnaces, heat pumps and heating repairs.
Over 17 years in business, the family-owned Richland company works on furnaces, boilers, heat pumps and air conditioning. Its service is open at all hours.
Working with Lennox equipment, the Kennewick firm installs and repairs furnaces, heat pumps and ductless mini-splits. Financing is available and free estimates are given.
Hermiston-based, the business works on furnaces, heat pumps, ductless mini-splits and water heaters, and carries American Standard equipment. Financing is available.
Serving the Tri-Cities since 1986, the Richland company answers emergency calls day and night. It installs Rheem, Ruud and Bosch equipment and provides free estimates.
Family owned since 2004, the Kennewick firm works on boilers, furnaces and heat pumps, and also does basement flooding work. It is open weekdays.
Since 1980 and family-owned, the Pasco company covers furnaces, heat pumps and ductless systems, and offers a 2-year warranty.
Founded in 2007, the family-owned Pasco firm covers air conditioning, furnaces, heat pumps and ductless mini-splits, with Carrier, Trane and Daikin among its brands.
Open day and night, the Kennewick company services air conditioners, heat pumps and furnaces. It has worked with Amana equipment and has operated since 2000.
Ductless mini-splits are the heating and cooling work listed for this electrical firm in Pasco, which is open weekdays.
Ruud and Daikin equipment is part of the ductless mini-split and air conditioning work from this Kennewick HVAC company, which offers a 10-year warranty.
Heat pumps, furnaces and ductless mini-splits are installed and serviced by this family-owned Hermiston contractor, which started in 2020.
Open around the clock, every day, the Boise company works on furnaces, boilers, heat pumps and ductless mini-splits, and also handles frozen pipes and backup power.
Also serves Boise
Working on weekdays, the Pasco company covers air conditioning, furnaces and heat pumps for residential and commercial properties in Kennewick, Richland and Pasco.
Carrier equipment comes up in the work of this Hermiston contractor, which covers boilers, water heaters, furnaces and heat pumps. Its hours are weekdays.
Serving the Mid-Columbia for more than 40 years, this family-owned Richland company also does electrical and controls work alongside HVAC. Carrier is among its brands.
Heating contractor whose website lists furnace repairs and installs, heat pumps, air conditioning and heating repairs.
Not yet verified. We checked that each one’s own website offers this work, but we haven’t contacted them yet. How a business gets listed
Know a good one we’re missing? Suggest one
Benton PUD states that its average outage restoration time is 2 hours.
The Washington State Climatologist reported that mean December 2022 temperatures were well below normal statewide, with especially large anomalies in eastern Washington, among the top ten coldest Decembers on record.
Office of the Washington State Climatologist (source, opens in a new tab)
Have fuel-burning appliances such as a furnace or boiler inspected by a professional at least once a year.
Get written quotes from at least three contractors for the same work, and check references from recent clients.
Put it in a written contract: the work, price, deposit, start and finish dates, warranty, permits and clean-up. Paying cash to skip it leaves you no recourse.
Kennewick's permitting guide says a Mechanical Permit covers the installation, maintenance, alteration and inspection of mechanical systems for heating, air and fuel gas-fired appliances. Ask the contractor whether your repair falls under it and who will apply for it before work begins. City of Kennewick (source, opens in a new tab)
Washington L&I says an electrical permit is required for most electrical work, whether you or your contractor installs a new item or repairs or replaces an existing one. If your repair involves wiring, ask the contractor how the electrical permit will be handled. Washington State Department of Labor & Industries (source, opens in a new tab)
Ask for the equipment involved, the work to be done, parts, labour, any permit needed and the timing, all in writing. A clear quote lets you compare offers and avoids surprises, even when the heat or cooling is out and you are short on time.
Contact at least two businesses if you can. Compare what each one includes, such as diagnosis, parts, permits and warranty on the work, rather than the speed of the reply alone. Ask each to confirm in writing what is covered before you agree.